Abus AZWG10020, Installation And Operating Instructions Manual

Page: 126 / 301

50 UK
Phone Line
Fault Telephone line not available for more than 40 s
For the device, the telephone line is available
when the voltage on the a/b line > 3 V.
Line OK Telephone line back in normal state
Remote Start Remote access established
Remote Clear Remote access ended
Time changed System date and system time have been changed
Supply Low The supply voltage has fallen below the preset lower
voltage limit
Supply OK The supply voltage has again exceeded the preset lower
voltage limit. The supply voltage is again in the normal
range.
Auto Report Automatic test call
Log Cleared Event log was deleted
After a complete factory reset, the event log is
deleted.
No Ack Name
01 No acknowledgment of the message by contact 1
Contacts 2
–10 analogously
The contact name is displayed as programmed.
“Name 01” is the factory setting.
Call Fail Name
01 Call to contact 1 failed
Contacts 2
–10 analogously
The contact name is displayed as programmed.
“Name 01” is the factory setting.
GSM Signal
Low The GSM signal has dropped below the preset value for
the low end of the GSM signal strength.
GSM Sig. OK The GSM signal has again exceeded the preset value for
the low end of the GSM signal strength. The GSM signal is
present and is again in the normal range.
Call PSTN Call being made over the analog telephone line
Call GSM Call being made over the GSM network