Absco Industries
Assembly Instruction Manual
ABSCO SKILLION CARPORT
MODEL: CPDN2
5.50mW x 5.50mD x 2.37mH
Model: CPSN2
25/11/22
14
BRACING
Take 16 flat strips (270 x 25 mm) and, using a
pair of pliers, bend the ends as pictured.
NOTE: There will be two left over, don’t fold
these.
The strip is fixed with a tek screw into the top
of the edge beam and into the pan of the
sheet below.
At the front and rear locate the strips in the
centre of the 4th sheet pan (610mm) and 14th
sheet pan (2090mm) from each side.
Along both sides
position the strips so
they are in line with the
cross beams.
TIP: For these front
and rear strips replace
the tek screws into the
sheeting with rivets for
a nicer finish.
30
