Absco Industries
Assembly Instruction Manual
ABSCO SKILLION CARPORT
MODEL: CPDN2
5.50mW x 5.50mD x 2.37mH
Model: CPSN2
25/11/22
10
BASE BRACKETS
Using the BKT02 base brackets a
templates, drill four 10mm holes in the
bottom of the posts.
Make sure the brackets are orientated
with the single hole to the ground and
they’re on the front and rear faces of the
post.
Join the 5220 mm cross beam to the top brackets
of the front posts with four M10 x 20 mm bolt
and a nut with washers per sides.
Repeat this step for the rear posts too.
Fasten with four of the
M10 x 20 mm bolt and
a nut with washers both
sides.
Above shows the bolt
inserted from inside the
post. Use a spanner to
hold it in place when
tightening.
FITTING CROSS BEAMS
