Absco Industries
Assembly Instruction Manual
ABSCO SKILLION CARPORT
MODEL: CPDN2
5.50mW x 5.50mD x 2.37mH
Model: CPSN2
25/11/22
7
EDGE BEAM ASSEMBLY
Layout these edge beams
as shown and secure at each
corner using the joiner angles
pictured below.
ZACO129
ZACO130
FRONT
Joined Side Edge Beams - 5500 mm long
Joined End Edge Beams - 3000 mm long
The joiner angles should be positioned on the
inside of the edge beams.
ZACO129 goes to the tall side and ZACO130
the short side.
Hold with ‘G’ clamps and fastened with tek
screws from the outside of the edge beams.
Also fasten the bottom overlap with three tek
screws.
Seal all joints with water proof sealant such as
silicone as these beams are an internal gutter
system.
The overall dimension of the assembled edge
beams joined should be 5500 x 5500 mm
ZACO
113
ZACO
113
ZACO
115
ZACO
115
ZACO
116
ZACO
116
ZACO
112
ZACO
112
