Sewin
g
he
re
#
L
E
D
O
M
WF-121090 WALL TENT WITH STOVE JACK
12ft x 10ft x 90in/3.65m x 3.04m x 2.28m
Review your parts list above to make sure all parts listed above have included in your package.
Call our toll free number:1-877-579-1550 Monday-Friday 8:30 am - 5:30 pm EST
FABRIC BODY:
STAKES:
1
9
8
8
1
24
2
2
2
2
4
1
1
Tent Body
Steel, chain-corded Roof Pole – black w/red taped
N/A
RPOL-115BK
Steel, chain-corded Roof Gable Pole – black w/white taped
RGPL-147BK
Steel, chain-corded Leg Pole – black w/yellow taped
LPOL-159BK
Carry Bag w/ wheels
N/A
φ
7mm steel stakes, length 25cm
ST25CM-7MM
N/A
3 way hubs – for ends in middle roof pole
3WAY-ER
4 way hubs – for center in middle roof pole
4WAY-CR
3 way hubs – for front right / rear left shoulder corners
3 WAY C-1
3 way hubs – for front left / rear right shoulder corners
3 WAY C-2
4 way hubs – for center in side roof poles
4 WAY-CRS
Pole Bag
N/A
Stake Bag
GROPE-3M-6
Guy Ropes:
φ
6mm, 3.0m
8
Select a smooth level site and spread out your tent.
Select a smooth level site and spread out your tent.
Extend all of your poles and sort into groups by style i.e. roof
poles, roof gable poles, leg poles. This will simplify the assembly
process. ( see fig. 1)
STEP 2: Set Up the Tent
Chain-corded Roof Pole – black
RPOL-115BK
chain-corded Roof Gable Pole – black
RGPL-147BK
chain-corded Leg Pole – black
LPOL-159BK
ASSEMBLY INSTRUCTIONS
C
a)
Lay out the Center Roof Pole and Side Roof Poles as shown below
(see fig.2).
Take 3 Roof Poles (RPOL-115BK)
and connect them to the 4-way
hub
s
(4WAY-CR) by matching the red hub to the red
pole ends
.
T
hen
connect the other side of the poles into t
he
3-way
hubs
(3WAY-ER)
, again matching the red hub to red pole end. All
push pins should click into place.
Similar to step
(a),
match the remaining red poles to
the hub
s
(4 WAY-CRS)
. T
hen slide into the hubs (3 WAY C-1 / 3 WAY
C-2) by matching the c
olors
at the end of the pole.
b)
STEP 3: Stake the tent
Stake the tent by driving stake through the rings on base of tent.
A
Stake the mud flap through the tri-angle rings.
C
To secure guy lines, find the guy line plastic slider and look for
the portion of the line opposite the knot. Pull this portion, forming
a loop (works like a slip knot). Extend guy line to ground and stake.
B
Tip: Stakes provided are for solid ground. Camping in sand?
We suggest corkscrew style. Check favorite retailer for
availability.
STEP 4: Add Accessories
Attach the floor by inserting the pins into the leg poles. Fasten
the buckle on each corner to straighten the walls. Use the Velcro
on the wall to secure the floor.
A
Hook organizers on the side roof pole.
B
Tie the guyrope loop to the central roof pole to hang camping
light.
C
Attach the LED light string with the plastic hooks to the O-rings
sewn inside the tent, and put the Power Box into the pockets.
D
3 WAY C-1
3 WAY C-2
4 WAY-CRS
4 WAY-CRS
RPOL-115BK
RPOL-115BK
RPOL-115BK
3 WAY C-1
3 WAY C-2
4 WAY-CRS
4 WAY-CRS
RPOL-115BK
RPOL-115BK
RPOL-115BK
3 WAY-ER
3 WAY-ER
4 WAY-CR
4 WAY-CR
RPOL-115BK
RPOL-115BK
RPOL-115BK
DISASSEMBLY INSTRUCTIONS
STEP 2: Take Down the Tent
Take down the organizer and remove the floor
STEP 3: Fold the Tent
Fold tent into rectangular shape the width of pole bag. Place
organizer, floor on tent body. Lay pole bag at one end of tent and
roll tightly together, slowly squeezing air out as you go.
A
Remove the leg poles from the pin-rings, and undo ties securing
leg poles. Take down the tent body from the frame.
B
Disengage poles from hubs.
C
Carefully fold poles and store them in their bag.
D
RPOL-115BK
RPOL-115BK
RPOL-115BK
RGPL-147BK
RGPL-147BK
LPOL-159BK
D
Slide Roof Gable Pole (RGPL-147BK) into the corresponding hubs
by matching the white hub to the white
pole end and lock
into place. Repeat with all other Roof Gable Poles.
Slide the leg poles (LPOL-159BK) into the roof frame by matching
the yellow
pole ends
into the corresponding yellow hubs.
Tip: Please try to keep the push pins in the middle hole and
use the upper and lower options to adjust the frame if
necessary.
E
base of tent
into
the pole end. Secure the tent by fastening the
velcro to the frame.
F
Put
the tent body onto the frame. Position the pin-rings on
3 WAY C-1
3 WAY C-1
4 WAY-CRS
4 WAY-CRS
3 WAY C-2
3 WAY C-2
3 WAY-ER
3 WAY-ER
4 WAY-CR
4 WAY-CRS
A
B
A
B
C
Summary of Contents for WF-121090
Page 2: ......
