ABS MegaCam 4210/4220 Network Camera User’s Manual
74/86
•
If you are using the default camera port settings, enter
80
into the
Public
and
Private
Port
section, click
Apply.
•
Scheduling
should be set to
Always
so that the camera images can be accessed
at any time.
A check mark appearing before the entry name will indicate that the ports are enabled.
Important:
Some ISPs block access to port 80. Be sure to check with your ISP so that
you can open the appropriate ports accordingly. If your ISP does not pass traffic on port
80, you will need to change the port the camera uses from 80 to something else, such as
8080. Not all routers are the same, so refer to your user manual for specific instructions
on how to open ports.
Enter valid ports in the
Virtual Server
section of your router. Please make sure to check
the box on this line to enable settings. Then the device can be access from WAN by the
router’s WAN IP Address.
By now, you have finished your entire PC configuration for this device.
Summary of Contents for MegaCam 4210
Page 1: ...ABS MegaCam 4210 4220 Network Camera User s Manual www abs com 1 86 ...
Page 41: ...ABS MegaCam 4210 4220 Network Camera User s Manual 41 86 ...
Page 53: ...ABS MegaCam 4210 4220 Network Camera User s Manual 53 86 ...
Page 54: ...ABS MegaCam 4210 4220 Network Camera User s Manual 54 86 ...