ABS MegaCam 4210/4220 Network Camera User’s Manual
38/86
UPnP is short for Universal Plug and Play, which is a networking architecture that
provides compatibility among networking equipment, software, and peripherals. This
device is an UPnP enabled Network Camera. If your operating system is UPnP enabled,
the device will automatically be detected and a new icon will be added to “My Network
Places.” If you do not want to use the UPnP functionality, it can be disabled.
In addition, this device also provides UPnP IGD function for NAT traversal easily. Use
NAT traversal when your device is located on an intranet (LAN) and you wish to make it
available from the other (WAN) side of a NAT router. With NAT traversal properly
configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded
to the device.
UPnP:
To enable or disable the UPnP service here.
Friendly Name:
Shows the friendly name of this device here.
UPnP NAT Traversal
When enabled, the device will attempt to configure port mapping in a NAT router on your
network, using UPnP™.
Note
that UPnP™ must be enabled in the NAT router first.
Port Range:
The port range will open in NAT router.
External IP address:
Summary of Contents for MegaCam 4210
Page 1: ...ABS MegaCam 4210 4220 Network Camera User s Manual www abs com 1 86 ...
Page 41: ...ABS MegaCam 4210 4220 Network Camera User s Manual 41 86 ...
Page 53: ...ABS MegaCam 4210 4220 Network Camera User s Manual 53 86 ...
Page 54: ...ABS MegaCam 4210 4220 Network Camera User s Manual 54 86 ...