![background image](http://html.mh-extra.com/html/abs/megacam-4210/megacam-4210_user-manual_453175044.webp)
ABS MegaCam 4210/4220 Network Camera User’s Manual
44/86
System
: Configure and maintain system
Use this menu to perform the principal settings of the device.
System
:
DIPS (Dynamic IP Service):
To enable or disable the DIPS® (Dynamic IP Service) function.
Device ID (for DIPS):
It’s a unique number of each device for identification and this ID is used for DIPS.
In the Appendix G, it describes how to locate your device from Internet by DDNS service.
However, we provide another easier way to do the same job called Dynamic IP Service,
DIPS®.
To use this service, just follow four steps below:
(1) Enable DIPS function of the device
(2) Check your Device ID from this page. This is a unique number for each device.
(3) If your device is behind a NAT router, please configure your device properly. You
could refer to section “Install the Camera behind a NAT Router” above. You only need to
do this job one time.
(4) Check the web site: http://www.abs.com/dips
Summary of Contents for MegaCam 4210
Page 1: ...ABS MegaCam 4210 4220 Network Camera User s Manual www abs com 1 86 ...
Page 41: ...ABS MegaCam 4210 4220 Network Camera User s Manual 41 86 ...
Page 53: ...ABS MegaCam 4210 4220 Network Camera User s Manual 53 86 ...
Page 54: ...ABS MegaCam 4210 4220 Network Camera User s Manual 54 86 ...