manualshive.com logo in svg

ABS MegaCam 4210, User Manual, Page: 48 / 86

Share
Download
ABS MegaCam 4210 User Manual Download Page 48

ABS MegaCam 4210/4220 Network Camera User’s Manual 

 48/86 

2. Make sure that only you access this device while firmware updating. 

 
3. Disable Motion Detection function. 

 

4. Click “

Browse

” button. Select the Firmware binary file. (

Note

 that

 

it must make sure 

that the Firmware only applies to this device, once update, it will be burned into FLASH 
ROM of system.

)  

 

5. Once the firmware file was selected, click “

Firmware Upgrade

” button.   

 

6. The upgrade progress information will be displayed. Once the uploading process 
completed, the device will reboot the system automatically. 
 
7. Please wait for timer countdown, and then you can use IPWizard to search the device 
again.  

 
 

Warning!!!

 

The download firmware procedure can not be interrupted. If the 

power and/or network connection are broken during the download procedure, it 
might possibly cause serious damage to the device.   
 
Strongly suggest that DO NOT upgrade firmware via Wireless LAN due to high 
error rate possibly and don't allow any other clients to access this unit during 
updating procedure.   
 
Be aware that you should not turn off the power during updating the firmware and 
wait for finish message.   
 
Furthermore, the firmware upgrade procedure always is risk and do not try to 
upgrade new firmware if it’s not necessary.

 

 
 

System Restart:   

The device is restarted without changing any of the network settings. It means the IP 
address of the device will not change after firmware upgrade.

 

 

Summary of Contents for MegaCam 4210























































































Reviews:

No comments