![background image](http://html.mh-extra.com/html/abs/megacam-4210/megacam-4210_user-manual_453175064.webp)
ABS MegaCam 4210/4220 Network Camera User’s Manual
64/86
Appendix A: Restore Factory
Default Settings
There is a button hidden in the pinhole near to the RJ-45 connector. This button is used
to restore the all factory default settings. Sometimes restarting the device will make the
system back to a normal state. However, if the system still got problems after restart,
user can restore the factory default settings and install it again.
Restore the device:
1. Insert the paper clip or other suitable tool to press and hold the button down
continuously.
2. Hold it least 3 seconds and release the tool. Then the device has been
restored to default settings and reboot again.
Note:
Restoring the factory default setting will lose the all previous settings included IP
address forever. User needs to run the IPWizard program to search the device and
configure it to let the device work properly again.
Factory
Default Reset
Summary of Contents for MegaCam 4210
Page 1: ...ABS MegaCam 4210 4220 Network Camera User s Manual www abs com 1 86 ...
Page 41: ...ABS MegaCam 4210 4220 Network Camera User s Manual 41 86 ...
Page 53: ...ABS MegaCam 4210 4220 Network Camera User s Manual 53 86 ...
Page 54: ...ABS MegaCam 4210 4220 Network Camera User s Manual 54 86 ...