ABS MegaCam 4210/4220 Network Camera User’s Manual
57/86
: Setup E-Mail configuration
You may setup SMTP mail parameters for further operation of Event Schedule. That’s, if
users want to send the alarm message out, it will need to configure parameters here and
also add at least one event schedule to enable event triggering.
SMTP Server:
Type the SMTP server name or the IP address of the SMTP server.
Test:
Send a test mail to mail server to check this account is available or not.
SMTP Port:
Set port number of SMTP service.
SMTP Authentication:
Select the authentication required when you send an e-mail.
Disable
: if no authentication is required when an e-mail is sent.
Enable
: if authentication is required when an e-mail is sent.
Authentication User name:
Type the user name for the SMTP server if
Authentication
is
Enable
.
Authentication Password:
Type the password for the SMTP server if
Authentication
is
Enable
.
E-mail From:
Summary of Contents for MegaCam 4210
Page 1: ...ABS MegaCam 4210 4220 Network Camera User s Manual www abs com 1 86 ...
Page 41: ...ABS MegaCam 4210 4220 Network Camera User s Manual 41 86 ...
Page 53: ...ABS MegaCam 4210 4220 Network Camera User s Manual 53 86 ...
Page 54: ...ABS MegaCam 4210 4220 Network Camera User s Manual 54 86 ...