www.abl.de
14
English
12VDC
230VAC
• Connect each sensor in use to the correct current
sensor input on
SBC
home.
›
NB! Phase dependent; follow the
installation diagrams. See also section
"12. Charge controller address vs. current
sensor input".
• Connect the 12V DC cable between the power
supply and
SBC
home.
• Route the communication cables away from
line-
voltage elements. Do not route the
SBC
home
cables in parallel with the supply lines. Secure
the
cables with nylon cable ties to suitable fixing
points.
• Power up
SBC
home
by connecting 230V AC to the
power supply.
›
Warning! Check connections before
powering!
• Make sure that the sensors are properly locked. Listen for a firm "click" when locking.
Max
12mm
CLICK!
