manualshive.com logo in svg

Abit BE7-G, User Manual, Page: 77 / 112

Share
Download
Abit BE7-G User Manual Download Page 77

Install LAN Driver 

D-1 

Appendix D.  Install LAN Driver 

 

The installation procedures and screen shots in 
this section are based on Windows XP operating 
system. For those of other OS, please follow its 
on-screen instruction. 

Insert the Driver & Utility CD into CD-ROM 
drive, it should execute the installation program 
automatically. If not, double-click the execution 
file at the main directory of this CD to enter the 
installation menu. 

For BE7 and BE7-RAID: 

After entering the installation menu, move your 
curser to [Driver] tab. Click [RealTek LAN 
Driver]. The following screen appears. 

 

1. 

Click [Next]. 

 

2. 

Click [Finish] to complete setup. 

For BE7-S and BE7-B: 

After entering the installation menu, move your 
curser to [Driver] tab. Click [Broadcom 10/100 
LAN Driver]. The following screen appears. 

 

Click [Next]. 

1. 

 

2. 

Click [Yes] to accept the license agreement. 

Reboot the system to make the driver effective. 

 

 

 

 

 

 

 

User’s Manual 

Summary of Contents for BE7-G

















































































































Reviews:

No comments