A.2
Instructions for Use & Clinical Reference Manual (US)
DISPLAY
The
DISPLAY
soft button opens a menu that includes the following options for viewing
waveforms and navigating to other screen displays:
•
Y-axis Scale
—opens a menu from which you can select a waveform and change its
appearance by adjusting the scale of the y-axis.
Once the waveform is selected, turn the selector knob clockwise to increase the y-axis
scale and counterclockwise to decrease the y-axis scale.
Select
OK
to accept the new y-axis scale.
Select
Restore
to return to the default y-axis scale.
Select
Initial
to set the y-axis to the previously set scale.
Select
Center Signal
to center the waveform.
Select
Cancel
to exit the tool.
•
Time Scale
—allows you to apply different time scales to the currently displayed
waveforms.
•
Center
—automatically centers the motor current waveform and adjusts the range
accordingly.
•
Infusion
—opens the infusion history screen. The infusion history screen, which is
discussed in section 4 of this manual, shows the volume and the amount of heparin and
dextrose delivered. The top entry in the table shows the volume and amount of heparin
and dextrose infused from the top of the hour through the current time.
•
Purge
—displays the purge system waveforms and pressure and flow values.
•
Placement
—opens the placement signa / motor current screen
(described in section 4 under “Placement Screen”).
PURGE SYSTEM
The
PURGE SYSTEM
soft button opens a menu that includes the following purge system
procedure options:
•
Change Purge Fluid
—starts the procedure to change the purge fluid
•
Change Purge Cassette
—starts the procedure to replace the purge cassette
•
Change Purge System
—starts the procedure to change both the purge fluid
and purge cassette
•
De-air Purge System
—starts the de-air procedure
These procedures are described in section 5 of this manual.
