4.6
Instructions for Use & Clinical Reference Manual (US)
Table 4.3 Automated Impella
®
Controller Display Elements (continued)
Display Element
Description
Mute alarm indicator
Displayed in place of the words “MUTE ALARM” when an alarm is
silenced. (See section 6 of this manual for more information about the
mute alarm function; Figure 6.1 illustrates the mute alarm indicator.)
• Yellow bell with red X displayed when an alarm is muted
• Not displayed when an alarm is active (but not muted) or when there
are no active alarms
Soft button labels
The soft buttons on the Automated Impella
®
Controller have
corresponding labels adjacent to them on the display screen. These labels
change depending on the type of screen displayed. (Refer to Appendix A in
this manual for more details about the menu structure.)
MUTE ALARM
• Mutes (silences) active alarms
FLOW CONTROL
(or
NEXT
)
•
FLOW CONTROL
– Allows you to set the performance level for the
Impella
®
RP Catheter
•
NEXT
– Advances to the next screen
DISPLAY
(or
BACK
)
•
DISPLAY
– Brings up the Display menu for viewing waveforms and
navigating to other screen displays
•
BACK
– Returns to the previous screen
PURGE SYSTEM
(or
EXIT
)
•
PURGE SYSTEM
– Brings up the Purge System menu for changing
the purge fluid, purge cassette, or purge system, or de-airing the
purge system
•
EXIT
– Exits the current procedure
MENU
•
MENU
– Brings up a menu of options related to controller settings,
alarm history, offset adjustment, and starting a case
System power area
System power information is displayed to the right of the purge system
information on the bottom of the display screen.
Battery status
– Bar within battery symbol indicates the overall remaining
capacity of the batteries
• Full green bar for fully charged battery
• Partial green bar for battery that is at least 50% charged
• Partial yellow bar for battery that is between 16% and 50% charged
• Partial red bar for battery that is less than or equal to 15% charged
• Moving gray bar for battery that is in charging mode
• Numeric percentage of battery power remaining displayed below the
battery icon
AC plug indicator
• Green plug indicates that the controller is running on AC power
• Gray plug with a red X indicates no AC power detected and the
controller is running on battery power
Purge System
Stabilization
The purge system must
stabilize after case start,
a purge procedure, or
resolution of a purge alarm.
During this time, it may take
up to 3 minutes for purge
system information to display
on the screen.
