47
P5
ABOUT DISPLAY:
PROGRAM AND MANUAL PROFILE DISPLAY:
Display the profile of Manual, P1~P9, U1, U2, 60% MAX H.R.C and 85% MAX
H.R.C. The profiles of manual, P1, P2, P3, P4, P5, U1, and U2 are speed profiles.
The profiles of P6, P7, P8, P9, 60% MAX H.R.C, and 85% MAX H.R.C are incline
profiles. The profile was divided into 20 segments; without setting the time, each
segment would be 30 seconds long. If you set the total time you wish to exercise,
each column would contain the length of total time divided by 20.
TIME Display:
Shows the exercise time.
Count up: Without setting the value, time will count up after press START button and
the maximum value is 99:59.
Count down: In the setting mode, press SPEED or SPEED button to set the desired
time for exercise. The range of setting value is from 10:00 to 99:00 with each
increment or decrement of 1:00. After finish setting the value, the monitor will start to
count down. While counting down to 0:00, the monitor will beep to remind that the
target is achieved, and stop counting at the same time.
DISTANCE Display:
Shows the distance.
Count up: Without setting value, the distance will count up and the maximum value is
999 km.
Count down: In the setting mode, press SPEED or SPEED button to set the desired
distance to exercise. The range of setting value is from 1.0 km to 999 km with each
increment or decrement of 1.0km. After finish setting the value, it will start to count
down. While counting down to 0.0, the monitor will beep and remind you that the
target is achieved, and stop counting at the same time.
CALORIES Display:
Shows the calories consumed.
Count up: Without setting value, the calorie will count up and maximum value is 999
Kcal.
Count down: In the setting mode, press SPEED or SPEED button to set the desired
calorie to be burned. The range of setting value is from 1.0 Kcal to 999 Kcal with
each increment or decrement of 1 Kcal. After finish setting the value, it will start to
count down. While counting down to 0.0, the monitor will beep and remind you that
the target is achieved, and stop counting at the same time.
P6
SPEED Display:
During the exercise, shows the speed that treadmill currently provide. The speed can
be adjusted by pressing SPEED and SPEED buttons.
In the setting mode, it shows the minimum speed of this program. It can be adjusted
by pressing SPEED and SPEED buttons to set the speed of this program from 1.0km
to maximum 18.0km. or 20.0km. (depend on different machines)
