BAL.0153 • 2018-08-24
EN - 5
ALPHA FLUX
4 Scope of delivery
4 Scope of delivery
The welding torches of this series are delivered as complete unit ready for welding and are
equipped ex works with the standard or the desired wire guide and with a contact tip.
Order the equipment parts and wear parts separately.
Order data and ID numbers for the equipment parts and wear parts can be found in the current
catalogue. Contact details for advice and orders can be found online at
www.binzel-
abicor.com
.
5 Functional Description
The functioning FCAW welding torch comprises the following components:
• Torch neck with equipment parts and wear parts
• Handle with or without switchover contact
• Coaxial cable
• Machine connections KZ-2 or LN
For welding, a wire electrode is fed through the welding torch system. The arc and the molten
pool are protected by gases formed by combustion of the additional materials contained in the
flux-cored wire.
The wire electrode is a melting fluxed-core wire fed through the contact tip. The contact tip
transfers the welding current to the wire electrode. The arc is formed between the wire electrode
and the part. In all designs, the torch neck is air-cooled, and the welding torch has the same
design.
The standard torch neck is bent by 65 °. Special models also being available as options. An
aluminum hand shield protects the handle with integrated button. An additional switch can be
mounted laterally. The wire layout can be replaced.
Type
Type of cooling
Load
Duty cycle
Wire
ALPHA FLUX
A
%
mm
350
air
330
60
1.2 - 2.4
Tab. 3
Product-specific torch data (EN 60 974-7) ALPHA FLUX
Standard length L
3.00 m, 4.50 m
Control lead
4-wire
Flexible at low temperatures of up to
-30 °C
Tab. 4
ALPHA FLUX cable assembly
• Welding torch complete, according to version
• Operating instructions
Tab. 5
Scope of delivery
