EN - 6
BAL.0153 • 2018-08-24
6 Putting into operation
ALPHA FLUX
6 Putting into operation
6.1 Setting up the torch neck
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to for the entire duration of maintenance,
servicing, mounting, dismounting and repair work:
• Disconnect all electrical connections.
DANGER
Risk of injury and device damage when handled by unauthorised persons
Improper repair work and modifications to the product may lead to serious injuries and
damage to the device. The product warranty will be rendered invalid if work is carried out on
the product by unauthorised persons.
• Operating, maintenance, cleaning and repair work must only be carried out by qualified
personnel (in Germany, see TRBS 1203).
NOTICE
• Do not use the welding torch in rain, snow or other weather conditions.
• Please take note of the following instructions:
3 Product Description on page EN-4
CAUTION
Risk of injury
Puncture or cut-in wounds may be caused by the wire electrode.
• Keep your hands out of the danger zone.
• Wear the correct protective gloves.
NOTICE
There are two different machine connection versions:
• Central plug KZ-2 FK, see 6.3 Mounting the liner on page EN-8.
• LN connection, see 6.4 Mounting the cable assembly on the machine side on page EN-8
Depending on the connection version, different components are used.
