Abicor Binzel ABITIG GRIP 1502, Original Operating Instructions

Page: 30 / 168

EN - 30
3 Product description ABITIG
®
GRIP
3 Product description
3.1 Technical data
All specifications relate to 4 m and 8 m cable assemblies. For further information regarding the available cable assembly designs and
performance data, please refer to the current order documentation.
3.2 Figures used
All figures can be found at the start of this document.
Tab. 1 General torch data (EN 60974-7)
Transport and storage −10°C to +55°C Shielding gas (EN ISO 14175) Argon
Relative humidity Up to 90% at 20°C Voltage rating Peak value of 113 V
Operation −10°C to +40°C Protection type of the device
connections (EN 60529) IP3X
Type of use Manual Max. arc ignition and stabilisation
voltage
Breakdown voltage 50 Hz 12 kV
Type of voltage DC or AC Switching current of trigger 0.01–100 mA
DC polarity of the electrodes Usually negative Switching power of potentiometer Linear 1 W at 40°C
Electrode Tungsten electrodes suitable for
TIG use, preferably
low
- radiation
Switching voltage of trigger 0.02–42 V (DC and AC)
Switching power of trigger Max. 1 W (resistive load)
Tab. 2 Liquid cooling specifications / cable assembly specifications
Liquid cooling specifications Cable assembly specifications
Flow pressure Min. 2.5 bar/max. 3.5 bar Cooling unit power Min. 800 W
Tab. 3 Product-specific welding torch data (EN 60974-7)
Type Type of
cooling Load Duty cycle Electrode Ø Gas flow rate Cooling
Supply temp. Flow
DC AC
1
1 Pursuant to EN 60974-7, the alternating current (AC) must be specified with 70% of the tested direct current (DC).
2 With 36-mm-long gas nozzle
Max. length 175 mm Max. Min.
[A] [A] [%] [mm] [l/min] [°C] [l/min]
150
2
Air 150 105 35 1.0–2.4 5–12
200 Air 200 140 35 1.6–4.0 7–18
260 W Liquid 260 185 100 1.0–3.2 7–18 50 0.7
260 W SC Liquid 340 240 100 1.0–3.2 7–18 50 0.7
450 W Liquid 400 280 100 1.6–4.8 7–20 50 0.7
450 W SC Liquid 450 320 100 1.6–4.8 7–20 50 0.7
500 W Liquid 500 350 100 1.6–6.4 7–22 50 0.7