9
This installation manual is for people in the Industry only.
installation, electrical connections and adjustments must
be made in accordance with current regulations. Read the
instructions carefully before starting the installation.
Incorrect installation can be a source of danger. Packa-
ging materials must be placed in the appropriate places
for waste and must not be left within the reach of
children. Before starting the installation check that the
product is in excellent condition. do not install the
product in explosive environments: the presence of
flammable gases or fumes is a serious safety hazard.
Before installing the POLY, make all the structural
changes necessary for protection and safety in general.
Verifies that the existing structure has the necessary
strength and stability requirements. The manufacturer is
not responsible for the work of the installer who does not
follow the safety standards in the construction of the
frames to be motorized. The manufacturer is not respon-
sible for deformations that may occur during use. The
safety devices must be installed according to the regula-
tions in force, the installation environment and the
system operating logic. The safety devices must protect
any areas of crushing or danger in general. Apply the
warnings required by the current regulation to identify
dangerous areas. Each installer must have visible indica-
tion of the important data of the door to be motorized.
Before connecting the power supply make sure that the
data are like the data of the electrical distribution
network. Install a bipolar switch / disconnector with
contact opening equal to or higher than 3mm on the
power supply network. Verifies that upstream of the
electrical system there is a good differential switch, an
overload protection and a grounding system. During
installation, maintenance and repair work, disconnect the
power supply before touching the electrical parts. The
handling of the electrical parts must be carried out with
antistatic conductive bracelets connected to the ground.
if the installed components are not safe and are not
compatible with the proper system functioning, the
manufacturer of the motorization declines all responsibi-
lity. For any repair or replacement of the products must
be used only original spare parts. The installer must provi-
de all information about automatic, manual and emer-
gency operation of the motorized door and give to the
end user with the instructions.
INSTRUCTIONS
AND RECOMMENDATIONS FOR END USERS
Keep work areas clear and clean. Check that the action
range of the photocells is free. Keep any device out of the
reach of children for safety reasons. Check periodically
the system to verify any anomalies, signs of wear or
damage. Verify that there are no damages to the movable
structures, to the automation components, to all the
fixing points, to the cables and to the connections. In case
of repairs or system settings modifications, disconnect
the automation and do not use it until the safety condi-
tions are restored. it is forbidden to carry out maintenan-
ce operations that do not follow the safety measures
listed above.
INSTALLATION, USE AND MAINTENANCE MANUAL
SAFETY INSTRUCTIONS
- WARNING! -
FOR PEOPLE SAFETY IT IS IMPORTANT TO READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
INSTALLATION WARNINGS
