FLASHING LIGHTS
----------------------------------------------------------------------------------------------------------------------------------------------
Secure one POLY LAMP board for each column using the dedicated holes. Place the flashing lamps so that they can be seen from both
directions.
Install the photocells in the pre-arranged holes as you see in the picture.
Example of photocells available on request?
PHOTOCELLS
Cable types and minimum thickness
CONNECTION
MOUNTING
VOLTAGE 230 V AC
FLASHING LIGHT (OPTIONAL)
PHOTOCELL (OPTIONAL)
THICKNESS
Unbolt the 8 screws [7] and remove the front cover [4], the rear cover [5] and the plastic cover [6] from the column.
Insert the column on the base plate: be careful that the screws get in the right position with the holes. Secure the column to the base plate
with the 4 washers and the 4 given nuts.
3
