ABEM Terraloc Pro 2
46
No of samples
-
Number of samples to acquire.
Available choices are: 256, 512, 1024, 2048, 4096, 8192,
16384, 32768, 65536, 131072, 262144, 480000
Pretrig/delay
(ms)
-
Selects the pre-trig or delay for the trig event. Pre-trig is set by
entering a negative time, and will save the corresponding
amount of data before the trig event. Delay is set by entering a
positive time, and will delay data acquisition after the trig
corresponding to the delay. The pre-trig/delay is measured in
milliseconds. The pre-trig can be set from 1 ms to the record
length. The delay can be set to the following ranges:
Sample
interval (ms)
Delay range (s)
20
0 - 9.6
40
0 - 19.2
100
0 - 48.0
200
0 - 96.0
400
0 - 192.0
1000
0 - 480.0
2000
0 - 960.0
4000
0 - 1920.0
10000
0 - 4800.0
No of stacks
-
If this number is greater than zero, the record will be saved
automatically when this number of stacks has been acquired. If
you type 0 (zero), stacking will continue until you press
<SAVE>. Even if you type a number higher than 0 (zero) you
may always interrupt stacking by pressing the <SAVE> key.
When the record has been saved, the next record will be
initialized
Stack mode
-
The stack mode determines how the acquired data is added to
the stack and how it is displayed.
The following stacking modes are available:
Name
Description
Fast
Adds the acquired data to the stack as soon as the data
is available. Does not display the data. The instrument
is automatically armed for the next shot.
This mode gives the highest rate for data collection as
no screen update takes place
Auto
The same as the Fast stack, but the stacked data is
displayed. The instrument is automatically armed for
the next shot
Preview Displays the acquired data and prompts the user to
accept or reject the data. When the data is accepted, it
is added to the stack, and the stacked data is
displayed. Press <ENT> to accept or <ESC> to reject
the acquired data. The instrument is automatically
armed for the next shot.
