Programming
Final Step - Confirm or Adjust Programming
Your Fleck valve will come pre-programmed to our default
settings. Here are the steps to confirm and adjust the
primary settings. Start on home screen.
1.
Time of Day.
The default time
of day is set to Arizona time. To
adjust, press the ‘Day & Time’
button located on top left screen.
Simply touch the number you want
to revise.
2.
Touch ‘Gear’ icon to confirm or adjust the ‘Day
Override’, ‘Regeneration Time’, and ‘Hardness’.
3. Day Override (DO).
We suggest and set your DO to
14 - 28 days (3 -6 people vs. 1 -2 people). Touch the button
to adjust this settting to your preference. Touch the ‘Check’
to confirm and close.
4. Regeneration Time (RT).
We suggest and set your RT
to 2 a.m.. Touch the button to adjust this setting to your
preference. Touch the ‘Check’ to confirm and close.
5. Hardness (H).
We set your hardness to 20 grains. You
can test your water with the supplied hardness test strip.
Touch the button to adjust this setting.
The Fleck valve will recaliborate to treat for this hardness
number. Touch the ‘Check’ to confirm and close.
Congratulations! Your water softener is programmed.
