![background image](http://html1.mh-extra.com/html/abc/fleck-5810/fleck-5810_manual_3339487004.webp)
Step 5 – Fasten the Threaded Adapter to the Bypass
1.
Lubricate the ‘o’-ring found
on the threaded adapter.
2.
Fasten the 2 nuts to the
bypass by turning nuts
clockwise.
Step 4 – Connect Bypass to Fleck Valve
1.
Apply silicone lube to the 2 ‘o’-rings
on the bypass valve. Once applied, slide
bypass valve onto Fleck valve.
2.
Fasten the bypass vavle to the Fleck
valve. Hand tighten each valve nut
clockwise.
Valve & Bypass Assembly
Step 6 – Attach Drain Line to Fleck Valve
1.
Locate drain line elbow
2.
Tape the threaded connection point
with 3-4 wraps of Teflon tape. Install
provided plastic barbed fitting to this
point.
3.
Install drain line
(not included)
to this
barbed fitting. Secure with a stainless
hose clamp
(not included).
Drain line should
extend to a main drain to dispose of
waste water.
Make Your Connections