Step 7 – Connect Brine Line to Fleck Valve
1.
Prep brine line prior to install using
plastic nut, plastic ferrule & brass tube
insert. Be sure to assemble in this order.
2.
Connect the provided plastic nut to
the Fleck valve. Hand tighten.
Step 8 – Connect Brine Well to Brine Tank Side Wall
1.
Locate the pre-drilled hole on the
brine tank. Fasten brine well to side wall
of brine tank using the supplied white
overflow elbow & plastic nut.
Step 9 – Connect Brine Line to Safety Float
You will receive 1 of 2 types of safety floats. One is a compres
-
sion fitting connection and the other is a push-to-connect fitting.
The
compression fitting requires
you to losen the nut prior to in
-
serting the brine line. Once the brine line is inserted, fasten
the compression nut to secure the line in place.
Push-to-Connect fittings
secure the line by inserting the tube into
the fitting until it slides into place and locks.