•
5 - Receive Setup
: Pressing puts the handheld in setup mode, so that the handheld can connect to the
i-STAT 1 Wireless Setup Utility.
After pressing , the user is asked for a password. After entering the appropriate password or pressing
ENT
, the user will see a
Waiting for Setup
screen. Once the test is complete, a
Setup Successful
or
Setup Failed
message (with an error code) will appear.
Enter Password
_ _ _ _ _
Waiting For
Setup
. . . .
1 – Cancel
Setup
Successful
1 – Continue
Note: Pressing
1-Continue
after
the Receive Setup screen
navigates the user back to
the Wireless Menu.
5
5
Note 5.1:
The
Receive Setup
function should only be used by IT personnel using the instructions
found in the
Configuring Wireless Settings in an i-STAT
®
1 Wireless Analyzer
Technical
Bulletin (Art: 726066).
i-STAT is a registered trademark of the Abbott Group of Companies in various jurisdictions.
Art: 726025-01A
12
Rev. Date: 24-NOV-14
Wireless Module
Error Code Description
FCC ID: YOPGS1500M
Wireless module is not configured
GS000
DHCP Process Time Out
GS001
Connection to Access Point has failed
GS002, GS010
Failed to make a TCP connection to Data Manager Port 6004
GS003
Unable to receive setup from APOC Wireless utility ad hoc
GS020, GS021
Wireless configuration storage failed to erase/ write to flash
GS022,GS023
Wireless configuration file corrupt or empty
GS024, GS025
Device customization failed to enable wireless module
GS030
Failed Ping request
TIMEOUT
ERROR CODE MESSAGES
