Sterile Barrier . Refer to Instructions for Use if
opened or damaged .
Do not use if package is damaged
For Sterile Barrier:
Do not use if the product
sterile barrier system or its packaging is
compromised .
This product must not be disposed of via
municipal waste collection . Separate collection
for electrical and electronic equipment waste
per Directive 2012/19/EC in the European Union
is required . Contact the manufacturer for details .
Electromagnetic Compatibility
• The System needs special precautions regarding EMC and needs to be installed and put into service
according to the EMC information provided in this manual.
• Portable and mobile RF communications equipment can affect the System.
• The use of accessories, transducers and cables other than those specified by Abbott Diabetes Care
may result in increased EMISSIONS or decreased IMMUNITY of the System.
• The System should not be used adjacent to or stacked with other equipment and that if adjacent
or stacked use is necessary, the System should be observed to verify normal operation in the
configuration in which it will be used.
Guidance and manufacturer’s declaration –
electromagnetic emissions
The System is intended for use in the electromagnetic environment specified below. The customer or
the user of the System should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic
environment – guidance
RF emissions
CISPR 11
Group 1
The System uses RF energy
only for its internal function.
Therefore, its RF emissions are
very low and are not likely to
cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
The System is suitable for use
in all establishments, including
domestic establishments and
those directly connected to the
public low voltage power supply
network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies
95
96
ART41600-101_rev-A_manual.indd 95-96
ART41600-101_rev-A_manual.indd 95-96
10/7/20 2:55 PM
10/7/20 2:55 PM