97
98
Steps
Do This
Check that the time and
12.
1U Drop for the block
are correct.
Review the
a.
Time and 1 U Drop settings on the screen.
Scroll up to select and change any setting as needed.
b.
Notice
c.
Next is highlighted.
Press
d.
Enter button.
Decide whether to add
13.
another block, delete
the block, or continue
to set carb ratios.
If you want to
Then do this
Add another
block
Notice
1.
Add block is highlighted.
Press
2.
Enter button
Repeat Steps 11 to 13 to add additional blocks per your
3.
healthcare professional’s recommendations.
Delete the block
Scroll to highlight
1.
Delete.
Press
2.
Enter button.
Scroll to
3.
Yes to confirm block deletion.
Press
4.
Enter button.
Continue to set
carb ratios
Note:
You must add at least 1 block before continuing or
you will get a warning. Clear the warning by pressing
Enter
button.
Scroll to highlight Next if not already highlighted.
Press Enter button.
Steps
Do This
Set CARB RATIOS.
14.
WARNING:
Accurate determination and programming of the insulin to
carbohydrate ratios are necessary to avoid possible delivery errors that may result in
adverse medical events or serious injury.
Notice
a.
Time line and dashes are highlighted.
Press
b.
Enter button.
Notice
c.
Time is highlighted.
Press
d.
Enter button.
Scroll to the desired time.
e.
Press
f.
Enter button.
Notice
g.
I:CHO
is highlighted.
Press
h.
Enter button.
Scroll to select desired
i.
I:CHO.
Note:
This sets the amount of insulin for a certain number of
carbohydrates
. The
default setting is 1U/15g and the range is 1U/1g to 1U/150g.
Press Enter button.
Check that the time and
15.
I:CHO for the block are
correct.
Review the
a.
Time and I:CHO settings on the screen.
Scroll up to select and change any setting as needed.
b.
Notice
c.
Next is highlighted.
Press
d.
Enter button.
Section 6: When You’re Ready – Optional Settings
6.1 Set Up Additional Options – SETUP WIZARD
Section 6: When You’re Ready – Optional Settings
6.1 Set Up Additional Options – SETUP WIZARD
DOC15736_Rev-A-Man.indd 97-98
2/9/09 11:29:42 AM
