ABB UNO-DM-2.0-TL-PLUS Manual Download Page 114

Page: 114 / 198

- 114 -

000698DG

7 - Operation

eb user interface menu structure

The following screenshots are related from a laptop visualization, may differ from smartphone

or tablet visualization.

The Web user interface is divided in six main sections, available on the

left sidebar:

MAIN:

Main section of web user interface dedicated to viewing the sum-

mary informations related the status and the production informations of

the inverter and photovoltaic plant.

SETUP:

Section dedicated to AC and DC line parameters configurations.

EVENTS:

Section dedicated to viewing Alarms and Warnings event log.

USER:

Section dedicated to User management.

NETWORK:

Section dedicated to inverter communication settings and

configurations.

TOOLS:

Section dedicated to main service tools configurations.

INFORMATION:

Section dedicated for general informations about the

embedded web user interface.

Summary of Contents for UNO-DM-2.0-TL-PLUS







































































































































































































Search results

Summary of Contents for UNO-DM-2.0-TL-PLUS

Reviews:

ABB UNO-DM-2.0-TL-PLUS, Manual, Page: 114 / 198

Search results

Summary of Contents for UNO-DM-2.0-TL-PLUS

Reviews: