26
…3
CONFIGURATION
SET PAPER LENGTH
m
AUTOMATIC REWIND AT
CHART END
YES
NO
PEN LIFT ENABLE
YES
NO
AUTO PEN DROP
YES
NO
Fanfold Chart
TIME LINE ADVANCE
ENABLE YES
NO
Roll Chart
CONFIGURATION
CHART CONTROL
YES
NO
EASY VIEW ENABLE
…3.4.1
Chart Control Configuration Page
Set Paper Length
Set the required paper length in 1m increments. For roll chart, the maximum
paper length is 25m. For fanfold chart, the maximum paper length is 12m.
Automatic Chart Rewind
When this feature is enabled, chart recording will stop and the chart will rewind
automatically when the chart remaining value reaches zero.
Note. Automatic rewind will operate only if the instrument is in the
Operating Page
when the chart end state is set.
Easy View Enable (roll chart only)
Easy view allows the operator to view the latest printed information on the chart
by winding the chart forward a small distance for a few seconds. The chart is
automatically returned to the recording position where it prints any buffered
data, ensuring no loss of data.
Select
YES
to enable Easy View function in the
Operating Page
.
Time Line Advance
The time line function enables the chart to be advanced to the required time line
before commencing recording.
Select
YES
to display Time Line advance function in the
Load Chart Page
.
Pen Lift Enable
Select
YES
to enable the front panel Pen Raise/Lower key (
).
Auto Drop Enable
Select
YES
to enable the auto drop facility. This returns the pen capsule to an
operating state approximately 5 minutes after the pen lift is activated.
Return to top of
Chart Control Configuration Page
.
