ABB Relion SAM600-IO, Protocol Manual

Page: 52 / 108

DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC
Oper.Check CO - Mod Cmd Mode parameter
stVal ST - - Mon Mode status parameter for 61850
q ST - - Mon Quality: Mode status parameter
for 61850
t ST - - Mon Timestamp: Mode status
parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter for 61850
q ST - Beh Mon Quality: Behaviour parameter for
61850
t ST - Beh Mon Timestamp: Behaviour parameter
for 61850
LORs v1_dSPC Oper.ctlVal CO - - Cmd Command parameter for
IEC61850
Oper.origin.orCat CO - - Cmd Command parameter for
IEC61850
Oper.origin.orIdent CO - - Cmd Command parameter for
IEC61850
Oper.ctlNum CO - - Cmd Command parameter for
IEC61850
Oper.T CO - - Cmd Command parameter for
IEC61850
Oper.Test CO - - Cmd Command parameter for
IEC61850
Oper.Check CO - - Cmd Command parameter for
IEC61850
SPTr v1_dSPS stVal ST - TR1P Mon Tripping single-pole
q ST - TR1P Mon Quality: Tripping single-pole
t ST - TR1P Mon Timestamp: Tripping single-pole
TwoPTr v1_dSPS stVal ST - TR2P Mon Tripping two-pole
q ST - TR2P Mon Quality: Tripping two-pole
t ST - TR2P Mon Timestamp: Tripping two-pole
TPTr v1_dSPS stVal ST - TR3P Mon Tripping three-pole
q ST - TR3P Mon Quality: Tripping three-pole
t ST - TR3P Mon Timestamp: Tripping three-pole
ClsLO v1_dSPS stVal ST - CLLKOUT Mon Circuit breaker lockout output (set
until reset)
q ST - CLLKOUT Mon Quality: Circuit breaker lockout
output (set until reset)
t ST - CLLKOUT Mon Timestamp: Circuit breaker
lockout output (set until reset)
Section 7
1MRK 511 440-UEN A
Logical node data model
46 Switchgear control unit SAM600-IO Version 2.2 IEC
Communication protocol manual