6.3
Removing protection relay
1.
Turn off the power.
2.
Detach the plug-in unit from the case.
3.
Disconnect the wiring.
4.
Loosen the M3 screws on the fixing clamp on the top and bottom.
GUID-8B02FC6A-DC22-4A32-9E06-16061D36EF15 V1 EN-US
Figure 30:
Loosening the M3 screws
5.
Detach the panel fixing clamp from the case.
6.
Remove the case from the panel cutout.
6.4
Sending protection relay for repair
•
In case of product problems, contact the nearest ABB office or representative
for consultation and instructions.
Section 6
2NGA000821 A
Removing, repairing and exchanging
46
REX610
Installation Manual
