4.5
Mounting protection relay
4.5.1
Required tools
•
T10 Torx screwdriver for mounting the case and for connecting the protective
earthing
Only use adjustable torque screwdrivers.
4.5.2
Flush mounting protection relay
All the mounting elements are integrated in the protection relay.
Requirements for installation:
•
Panel cutout of 129.0 ± 1 × 139.0 mm (5.0787 ± 0.03937 × 5.4724 in)
•
Depth behind the panel 163.6 mm (6.4409 in)
1.
Loosen the clamp screws from the top and bottom of the case.
2.
Detach the fixing clamp assembly.
2NGA000821 A
Section 4
Mounting
REX610
23
Installation Manual
