The warning icon indicates the presence of a hazard which could
result in personal injury.
The caution icon indicates important information or warning related
to the concept discussed in the text. It might indicate the presence
of a hazard which could result in corruption of software or damage
to equipment or property.
The information icon alerts the reader of important facts and
conditions.
The tip icon indicates advice on, for example, how to design your
project or how to use a certain function.
Although warning hazards are related to personal injury, it is necessary to
understand that under certain operational conditions, operation of damaged
equipment may result in degraded process performance leading to personal injury
or death. Therefore, comply fully with all warning and caution notices.
1.4.2
Document conventions
A particular convention may not be used in this manual.
•
Abbreviations and acronyms are spelled out in the glossary. The glossary also
contains definitions of important terms.
•
Push button navigation in the LHMI menu structure is presented by using the
push button icons.
To navigate between the options, use
and
.
•
Menu paths are presented in bold.
Select
Main menu/Settings
.
•
LHMI messages are shown in Courier font.
To save the changes in nonvolatile memory, select
Yes
and press
.
•
Parameter names are shown in italics.
The function can be enabled and disabled with the
Operation
setting.
•
Parameter values are indicated with quotation marks.
The corresponding parameter values are "On" and "Off".
•
Input/output messages and monitored data names are shown in Courier font.
When the function starts, the
START
output is set to TRUE.
•
Values of quantities are expressed with a number and an SI unit. The
corresponding imperial units may be given in parentheses.
2NGA000821 A
Section 1
Introduction
REX610
5
Installation Manual
