ABB Relion REX610 Installation Manual Download

Page: 51 / 64

See the technical, engineering and operation manuals for
details on features supported by the USB based connectivity
and the USB based power-up.

5.9

Energizing protection relay

Before connecting the auxiliary power, check that the protective
film is removed from top of the protection relay.

•

Before connecting the auxiliary power, check that the terminal strip is wired
and placed correctly.

•

Remove the protective film from the top side of the unit. Check that there is no
debris visible in the ventilation holes.

The c

over label mus

t be

remo

ved bef

ore the r

ela

will be ener

gized

GUID-79A04A4C-9540-4E82-BDAB-55902BC65D70 V1 EN-US

Figure 29:

Removing the protective film

Green Normal LED starts to flash.

LCD lights up and

IED start-up

is displayed.

The main menu is displayed. A steady green Normal LED indicates a
successful start-up.

2NGA000821 A

Section 5

Connecting

REX610

Installation Manual

Summary of Contents for Relion REX610































































Search results

Summary of Contents for Relion REX610

Reviews:

Related manuals for Relion REX610

Brands by name

Popular brands

ABB Relion REX610, Installation Manual

Search results

Summary of Contents for Relion REX610

Reviews:

Related manuals for Relion REX610

Brands by name

Popular brands