ABB RELION REM615, Product Manual

Page: 54 / 72

22. IED case and IED
plug-in unit
For safety reasons, the IED cases for current
measuring IEDs are provided with
automatically operating contacts for short-
circuiting the CT secondary circuits when a
IED unit is withdrawn from its case. The IED
case is further provided with a mechanical
coding system preventing current measuring
IED units from being inserted into a IED case
for a voltage measuring IED unit and vice
versa, i.e. the IED cases are assigned to a
certain type of IED plug-in unit.
23. Selection and
ordering data
The IED type and serial number label
identifies the protection IED. The label is
placed above the HMI on the upper part of
the plug-in-unit. An order number label is
placed on the side of the plug-in unit as well
as inside the case. The order number consists
of a string of codes generated from the IED's
hardware and software modules.
Use the ordering key information to generate
the order number when ordering complete
IEDs.
H B M B C C A H B C C 1 B B N 1 X D
# DESCRIPTION
1
IED
615 series IED (including case) H
615 series IED (including case) with test switch, wired
and installed in a 19” equipment panel
K
615 series IED (including case) with test switch, wired
and installed in a mounting bracket for CombiFlex
rack mounting (RGHT 19” 4U variant C)
L
2 Standard
IEC B
3 Main application
Motor protection and control M
GUID-9FB976AB-D4D5-41C4-AF30-245FD5154CFF V2 EN
Motor Protection and Control 1MRS756890 D
REM615
Product version: 3.0
Issued: 2010-06-29
54 ABB