IEC13000060-1-en.vsd
IEC13000060 V1 EN-US
Figure 7:
Select the TCP/IPv4 protocol and open Properties
5. Select Use the following IP address and define
IP address and Subnet mask if the front
port is used and if the
IP address is not set to be obtained automatically by the IED, see
. The IP address must be different from the IP address chosen for the IED.
IEC13000062-1-en.vsd
IEC13000062 V1 EN-US
Figure 8:
Select: Use the following IP address
6. Use the
ping command to verify connectivity with the IED.
7.
Close all open windows and start PCM600.
1MRK 502 067-UEN B
Section 4
Starting up
45
Commissioning manual
