1.
Select
Main Menu/Configuration/HMI/FB naming convention
and press
.
2.
Change the display symbols with
or
.
3.
Press
to confirm the selection.
The IED has to be rebooted if the WHMI display symbols are
changed. With the LHMI, the change takes effect immediately.
8.5.2.4
Changing the default view
The default view of the display is
Measurements
unless set otherwise.
1.
Select
Main menu/Configuration/HMI/Default view
and press
.
2.
Change the default view with
or
.
3.
Press
to confirm the selection.
8.5.2.5
Setting system time and time synchronization
1.
Select
Main Menu/Configuration/Time/System time
and press
.
2.
Select the parameter with
or
.
3.
Press
, change the value with
or
and press
again.
4.
Repeat steps 2 and 3 to set the rest of the system time parameters.
5.
Select
Main Menu/Configuration/Time/Synchronization/Synch source
and
press
.
6.
Select the time synchronization source with
or
.
7.
Press
to confirm the selection.
Setting daylight saving time
The IED can be set to determine the correct date for the DST shift every year. The
UTC time is used to set the DST.
1.
Set the
DST on day
and
DST off day
parameters to define on which week day
the time shift occurs.
2.
Set the
DST on date
and
DST off date
parameters to define on which month and
week the time shift occurs.
The DST on/off date must precede the selected DST on/off day and be within
the same week as the DST shift.
Section 8
1MRS756708 A
Commissioning
104
615 series
Operation Manual
