A070931 V3 EN
Figure 31:
Writing values to IED
The values are not stored to the flash memory.
2.
Click
Commit
to write the values to the flash memory.
•
Click
Reject
to cancel saving settings.
•
If the parameter has an edit-copy, the original parameter value is
restored.
•
If the parameter does not have an edit-copy, the edited parameter
value remains visible until you reboot the IED. However, the edited
value is not stored in non-volatile memory and thus the reboot
restores the original value.
A070932 V3 EN
Figure 32:
Committing changes
1MRS756708 A
Section 4
Using HMI locally or via web interface
615 series
49
Operation Manual
