ABB relion REF615 Operation Manual Download

Page: 29 / 126

3.2.4

LHMI functionality

3.2.4.1

Protection and alarm indication

Protection indicators

Protection indicator LEDs are Ready, Start and Trip.

Table 7:

Ready LED

LED state

Description

Off

Auxiliary supply voltage is disconnected.

Normal operation.

Flashing

Internal fault has occurred or the IED is in test mode. Internal faults are

accompanied by an indication message.

Table 8:

Start LED

LED state

Description

Off

Normal operation.

A protection function has started and an indication message is displayed.

•

If several protection functions start within a short time, the last start is

indicated on the display.

Flashing

A protection function is blocked.

•

The blocking indication disappears when the blocking is removed or

when the protection function is reset.

Table 9:

Trip LED

LED state

Description

Off

Normal operation.

A protection function has tripped and an indication message is displayed.

•

The trip indication is latching and must be reset via communication or
by pressing

•

If several protection functions trip within a short time, the last trip is

indicated on the display.

Alarm indicators

The 11 matrix programmable LEDs are used for alarm indication.

1MRS756708 A

Section 3

615 series overview

615 series

Operation Manual

Summary of Contents for relion REF615






























































































































Search results

Summary of Contents for relion REF615

Reviews:

Related manuals for relion REF615

Brands by name

Popular brands

ABB relion REF615, Operation Manual

Search results

Summary of Contents for relion REF615

Reviews:

Related manuals for relion REF615

Brands by name

Popular brands