4.2
Using WHMI
WHMI is disabled by default. You must be logged in and authorized to use the WHMI.
1.
To enable the WHMI, select
Main menu/Configuration/HMI/Web HMI
mode
via the LHMI.
2.
Reboot the IED for the change to take effect.
4.2.1
Logging in
1.
Enter the username with capital letters.
2.
Enter the password.
3.
Click
Log in
.
A070923 V2 EN
Figure 21:
Entering username and password to use the WHMI
4.2.2
Logging out
The user is logged out after session timeout. The timeout can be set in
Main menu/
Configuration/HMI/Web HMI timeout
.
•
To log out manually, click
Logout
on the menu bar.
1MRS756708 A
Section 4
Using HMI locally or via web interface
615 series
41
Operation Manual
