36
ProKiln GAC400
PROBE GAS SAMPLING SYSTEM | OI/GAC400-EN REV. A
5
Transport and storage
Safety instructions
Take into consideration the following safety instructions for all
actions related to transport and storage:
WARNING
Mechanical, thermal and material dangers
Risk of injury in the area of the probe gas sampling system
due to moving or falling parts, anti-freeze, lubricating oil.
• Wear general personal protective equipment:
• Closed overalls with long trousers and long sleeves
• Safety shoes (preferably boots covering ankles)
• Safety gloves suitable for mechanical work Safety glasses
• Protective helmet
• If necessary, additional protective equipment if prescribed
by the operator.
WARNING
Heavy transport units
Danger of crushing when lifting or lowering the transport unit
• Only appropriately trained personnel may transport the
transport units and only with the aid of the recommended
transport equipment.
• Do not stand under suspended loads.
• Follow the transport instructions in these operating
instructions carefully.
Transport
General remarks regarding transport
During transport make sure that the transport packaging is not
damaged or removed. Observe the below-mentioned
temperature and humidity limits during transport.
In the event of transport damage attributable to improper
handling, instigate damage assessment by the carrier (rail, post
office, and forwarder) within seven days. Make sure that none of
the enclosed accessories are lost during unpacking. Store the
screws in case the unit needs to be transported again in the
future.
Transport with crane
The retractor including the probe weighs 700–900 kg depending
on the length of the retractor and type of probe. A crane and
suitable transport equipment is required for transport and
unpacking.
