ABB FSM4000 Series, Operating Instruction, Page: 134 / 136

134 FSM4000 ELECTROMAGNETIC FLOWMETER | OI/FSM4000-EN REV. E
15 Appendix
Overview of setting parameters and technical design
Measuring point: TAG no.:
Sensor model: Transmitter type:
Order no.: Device no.: Order no.:
Measuring medium temperature: Voltage supply:
Lining: Electrodes: Exciter frequency:
C
zero
: C
Span
: System zero point:
Parameter Adjustment range
Prog. Protection code: ................ 0-9999 (0 = factory setting)
Language: ................ e.g., German, English, French, etc.
Flowmeter sensor ................ see name plate or the submenu ‘System Data/Sensor’
Nominal size: ................ DN 1 to DN 1000
Q
max
: ................ 0.05 Q
max
DN to 1 Q
max
DN
Pulse factor: ................ Imp./phys. Unit
Pulse width: ................ 0.100 to 2000 ms
Offset suppression: ................ 0 to 10 % of upper range value
Damping: ................ 0.2 (0.07) to 20 seconds
Noise reduction ................ OFF / 1 / 2/ 3 / 4
Density: ................ 0.01 g/cm
3
to 5.0 g/cm
3
Unit Q
max
.: ................ e.g., l/s, l/min, l/h, hl/s, hl/min, hl/h, etc.
Unit totalizer: ................ e.g. l, hl, m
3
, igal, gal etc.
Max. alarm: ................ %
Min. alarm: ................ %
Switching output: ................ Max. Alarm, Min. Alarm, Max./Min. Alarm, General alarm, empty conduit etc.
Contact input: ................ External zero return, Totalizer reset, External system zero, no function
Current output: ................ 0/4 to 20 mA, 0/2 to 10 mA, 0 to 5 mA, 0 to 10-20 mA, 4 to 12 to 20 mA
I
out
with alarm: ................ 0 %, 103 %, 3.8 mA, Low, High
Detector e. pipe: ................ ON / OFF
Calibrate e. pipe: ................ 0 to 10000
Alarm e. pipe: ................ ON / OFF
I
out
for e. pipe: ................ 0 %, 103 %, 3.8 mA, Low, High
Totalizer function: ................ Standard, difference totalizer
1. display line: ................ Q (%), Q (unit), Q (mA), counter V/R, TAG number, blank line, bar graph
2. display line: ................ Q (%), Q (unit), Q (mA), counter V/R, TAG number, blank line, bar graph
3. display line: ................ Q (%), Q (unit), Q (mA), counter V/R, TAG number, blank line, bar graph
4. display line: ................ Q (%), Q (unit), Q (mA), counter V/R, TAG number, blank line, bar graph
Operating mode: ................ Standard / Piston Pump / Fast
Flow direction: ................ Forward / reverse flow, Forward flow
Directional display: ................ Standard, inverse
Pulse output: Active Passive
Communication: HART PROFIBUS PA FOUNDATION Fieldbus Without
Diagnosis
Threshold monitoring
Error (E)
Warning (W) Measured value E/W Min. Max. Measured value E/W Min. Max.
Coil current AC Coil voltage DC
Coil resistance Coil temperature
Coil insulation resistance DAC value
Electrode voltage Electrode balance
Signal-to-noise ratio Magnetic linearity