Manual Power Quality Inverter ESI-S
The ESI-Manager user interface 71
Table 33 Alarm/lock status icons
Icons
Status
Software lock
Software unlock
Hardware lock
Hardware unlock
Communication lock status
Communication unlock status
Alarm status
Fan status
Alarms
Programmed alarm can:
−
activate any digital output relay 1-6 if selected
−
activate global alarm NO/NC relay
Tprobe alarm 1 to 8 can activate global alarm NO/NC relay
Warnings
Programmed warning can activate any digital output relay 1-6 if selected
Tprobe warning 1 to 8 can activate global fan NO relay
Digital output contact icons are located at the bottom of the screen (Cf.
).These icons are numbered 1 to 6 when they are disabled. If these output contacts are
programmed, the corresponding icon changes. When the ESI-Manager closes one of its
six digital output relays (Cf.
) the corresponding symbol changes its
appearance as described in the
. When the relay considered opens again, the
symbol takes back the original appearance.
If a digital output is ‘Disabled’ the default icon is shown. Example:
