Figure 29
Figure 28
AKD-10, Racking Tool & storage location
AKD-10: Using eye bolts, chain and connector
6. Check that the breaker is free from obstruction while pushing it inside the
compartment, especially the rejection features below the breaker.
7. Check the secondary disconnects are aligning while pushing the breaker into the
compartment from fully withdrawn to DISCONNECT position
8. Push the breaker in until the compartment racking pins engage with the breaker
racking cams.
9. Remove the racking tool from the storage location on the breaker front panel and
extend the torque bar from inside the handle.
C
Summary of Contents for Emax 2 Retrofill
