38
CoriolisMaster FCB400, FCH400
CORIOLIS MASS FLOWMETER | CI/FCB400/FCH400-EN REV. H
… 5 Installation
… Opening and closing the housing
Single-compartment housing
1
Cover screws
2
Transmitter housing cover
3
Gasket
Figure 20: Open / close single-compartment housing
Open the housing:
• Perform
steps
A
and
B
.
Close the housing:
• Perform
steps
C
and
D
.
Adjusting the transmitter position
Depending on the installation position, the transmitter housing
or LCD display can be rotated to enable horizontal readings.
Transmitter housing
DANGER
Damaging the device carries a risk of explosion!
When the screws for the transmitter housing are loosened,
the explosion protection is suspended.
• Tighten all screws prior to commissioning.
• Never disconnect the transmitter housing from the
sensor.
• Loosen only the screws indicated when rotating the
transmitter housing!
Figure 21: Rotate transmitter housing
Rotate the housing:
• Perform
steps
A
to
C
.
