52
5.4
Input Assignment
Information.
• Assignment Process Variables, Remote Set Points and Position Feedbacks – can all be assigned to any analog input
or maths block result (if fitted).
Single Pen
Instrument
INPUt
ASSIGN
INPUt
ASSIGN
PV–1
IP–1
PV–2
IP–1
IP–2
IP–3
IP–4
IP–5
IP–6
bLK–1
bLK–2
bLK–3
bLK–4
PV–3
PV–4
rSP–1
PFb-1
rSP–2
PFb–2
2 Pen
Inst.
3 Pen
Inst.
2, 3 and 4 Pen
Instrument
3 and 4 Pen Instrument
4 Pen Instrument
2 Controller
Instrument
UPdAtE
dONE
Single
Controller
Instrument
UPdAtE
ACtIVE
Page Header – Input Assign
✶
Note. Entry and access to and from this page can only be implemented from the page header.
To advance to
ADVANCED CONFIGURATION LEVEL
frame press the
switch.
Process Variable 1
Select analog input or maths block result for Process Variable 1.
IP-1
to
IP-6
–
analog input 1 to 6 (if available)
bLK-1
to
bLK-4
–
maths block 1 to 4 (if available)
Process Variable 2
Select analog input or maths block result for Process Variable 2 – see
PV-1
for description of
inputs and maths blocks.
Process Variable 3
Select analog input or maths block result for Process Variable 3 – see
PV-1
for description of
inputs and maths blocks.
Process Variable 4
Select analog input or maths block result for Process Variable 4 – see
PV-1
for description of
inputs and maths blocks.
Remote Set Point (Controller 1)
Select analog input or maths block result for remote set point for Controller 1 – see
PV-1
for
description of inputs and maths blocks.
Position Feedback (Controller 1)
Select analog input or maths block result for position feedback for Controller 1 – see
PV-1
for
description of inputs and maths blocks.
Remote Set Point (Controller 2)
Select analog input or maths block result for remote set point for Controller 2 – see
PV-1
for
description of inputs and maths blocks.
Position Feedback (Controller 2)
Select analog input or maths block result for position feedback for Controller 2 – see
PV-1
for
description of inputs and maths blocks.
Update Active/Done
The
ACtIVE
frame is displayed momentarily as any changes are stored in the non-volatile
memory.
dONE
is displayed on completion.
Return to
Input Assign
frame.
…5
ADVANCED CONFIGURATION LEVEL
