CO NFIGURATIO N
CO NFIGURING A PC TO COMMU NICATE WITH AWIN
GW120 WIRELESS HART GATEWAY
4JNO0 0030 8 A
29
6
Configuration
6.1
Configuring a PC to communicate with AWIN GW120
WirelessHART Gateway
1.
Connect the AWIN GW120 to an Ethernet network using a CAT5 cable plugged into the
RJ45 socket (P1 port).
2.
Go to the
Network Connections
dialog box, and then click
Local Area Connections
button. Right-click and select
Properties
from the context menu.
3.
Highlight
Internet Protocol (TCP/IP)
, and then click
Properties
button.
4.
Click
Use the following IP address
button, and enter a desired IP address for the PC,
for example,
172.16.16.16
in the “IP address:” field.
IP address assigned to the PC must be different to that of the AWIN GW120
gateway.
5.
Enter
255.255.255.0
in the “Subnet mask:” field, and then click
OK
button.
Figure 8: Properties window to change IP address of a PC
These steps may be different depending on MS Windows version used. These
steps are valid for Windows 10 only.
Summary of Contents for AWIN GW120
