AO2000-LS25
LASER ANALYZERS | OI/AO2000-LS25-EN REV. D
33
6
Transport and storage
Inspection
Verify that all delivered parts match the order, see
on page 32.
Check the devices immediately after unpacking for possible
damage that may have occurred from improper transport.
Details of any damage that has occurred in transit must be
recorded on the transport documents.
All claims for damages must be submitted to the shipper
without delay and before installation.
Transporting the device
Observe the following instructions:
• Do not expose the device to humidity during transport.
Pack the device accordingly.
• Pack the device so that it is protected against vibrations
during transport, for example, by using air-cushioned
packing.
Storage conditions
Bear the following points in mind when storing devices:
• Store the device in its original packaging in a dry and
dust-free location.
• Observe the permitted ambient conditions for transport
and storage.
• Avoid storing the device in direct sunlight.
• In principle, the devices may be stored for an unlimited
period. However, the warranty conditions stipulated in
the order confirmation of the supplier apply.
Storage temperature range
−
20 to 55
°C (−4
to 131 °F)
Returning devices
Use the original packaging or a secure transport container of an
appropriate type if you need to return the device for repair or
recalibration purposes.
Fill out the return form (see
on page 84) and include
this with the device.
In accordance with the EU Directive governing hazardous
materials, the owner of hazardous waste is responsible for its
disposal or must observe the following regulations for shipping
purposes:
All devices delivered to ABB must be free from any hazardous
materials (acids, alkalis, solvents, etc.).
Address for the return:
ABB AG
Service Analysentechnik – Parts & Repair
Stierstädter Straße 5
60488 Frankfurt, Deutschland
Fax: +49 69 7930-4628
E-Mail: [email protected]
www.abb.de/prozessautomatisierung-service
