ABB ACS880-1607LC, Hardware Manual

Page: 99 / 106

Materials
Cabinet
• Zinc coated steel sheet
• Polyester thermosetting powder coating on visible surfaces, color RAL 7035 and
RAL 9017
Tin-plated copper Busbars for user power
connections
See Cooling circuit materials (page 88)
Liquid cooling system
Insulating materials and non-metallic items: mostly self-extinctive Fire safety of materials
(IEC 60332-1)
Standard package: Package
• timber, polyethylene sheet (thickness 0.15 mm), stretch film (thickness 0.023 mm),
PP tape, PET strap, sheet metal (steel)
• for land and air transport when planned storage time is less than 2 months or
when storage can be arranged in clean and dry conditions less than 6 months
• can be used when products will not be exposed to corrosive atmosphere during
transport or storage
Container package:
• timber, VCI sheet film (PE, thickness 0.10 mm), VCI stretch film (PE, thickness
0.04 mm), VCI emitter bags, PP tape, PET strap, sheet metal (steel)
• for sea transport in containers
• recommended for land and air transport when storage time prior to installation
exceeds 6 months or storage is arranged in partially weather-protected conditions
Seaworthy package:
• timber, plywood, VCI sheet film (PE, thickness 0.10 mm), VCI stretch film (PE,
thickness 0.04 mm), VCI emitter bags, PP tape, PET strap, sheet metal (steel)
• for sea transport with or without containerization
• for long storage periods in environments where roofed and humidity-controlled
storage cannot be arranged
Cabinets are fastened to the pallet with screws and braced from the top end to the
package walls to prevent swaying inside the package. Package elements are at-
tached to each other with screws.
The main parts of the drive can be recycled to preserve natural resources and en-
ergy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious
metals can be recycled as material. Plastics, rubber, cardboard and other packaging
material can be used in energy recovery. Printed circuit boards and large electro-
lytic capacitors need selective treatment according to IEC 62635 guidelines. To aid
recycling, plastic parts are marked with an appropriate identification code.
Contact your local ABB distributor for further information on environmental aspects
and recycling instructions for professional recyclers. End of life treatment must follow
international and local regulations. Disposal
Applicable standards
See ACS880 liquid-cooled multidrive modules electrical planning (3AXD50000048634
[English]).
Markings
See ACS880 liquid-cooled multidrive modules electrical planning (3AXD50000048634
[English]).
Technical data 99